Saturday, July 02, 2011

What was the surprise?

Sorry, I left that last post a little vague -- I just didn't want to take the chance that Megan would check her email and stumble onto the details before she got home.

The surprise is that I decided to paint the upstairs guest bathroom while she was gone. I got tired of looking at the old and moldy paint, so I went down to Lowe's, bought a bunch of painting supplies, picked a color and went at it. Most of the work was done in one afternoon, and I spent a little time the next couple of evenings cleaning up.

(If you've seen our downstairs bathroom, you'll realize I was pretty tame on the color choice here... I didn't feel like choosing a really bold color as a surprise. :) )

Unfortunately, I forgot to take any "before" pictures -- but here's a few that I did take!

The first paint on the wall! (Stupid blue painter's tape. Next time I'm buying an edger and skipping the tape altogether.)

That same wall, now painted!

The wall on the other side of the doorway. I had no idea a small bathroom was so hard to photograph -- there's just not enough room to take a good picture of it!

I even bought some off-white spray paint and repainted the heater vent cover, which was rusting and chipping pretty bad.

Overall, this was a fairly easy project but I learned a bunch along the way. The big things:
  • Use an edger instead of tape in the future. The tape is just a pain. 
  • If you must use tape, take it off immediately after you're done with the first coat. Don't wait until after the next day's touch ups, because it will peel paint off the walls. 
  • Take the medicine cabinet out of the wall first, so you don't have to do it after you realize you couldn't get to the spot behind the far side which is visible in the mirror... 
(This post was pre-recorded -- it will go live on Saturday, after Megan should be home.)




Wednesday, June 29, 2011

A surprise!

Megan already knows about the patched hole in the wall but I've got another surprise ready for her when she gets back this weekend!

I hope she likes it...

I hope she notices it...

Saturday, June 25, 2011

Filling the hole in the wall

So, Megan left last night for an outrigger canoeing race and then a week at Anglican summer camp... and I'm already bored...

...so I decided to fix the hole in the wall that I left while hanging the punching bag. I think it turned out pretty well:


It still needs a couple of gaps patched up, some sanding, and a coat of paint but at least you can't see into the wall anymore!

Also, I ran across this picture I took a couple weeks ago while we were playing D&D. Apparently Imri likes my motorcycle!

Wednesday, May 25, 2011

Hanging the Punching Bag

So… this time I’m not making any promises or even suggestions that I’ll start writing here on any regular basis. Apparently that’s just not going to happen.

However, I just finished a fun project that I wanted to share. This one is a bit out of the norm for me – instead of computers, this one involves lumber, saws, drills and bolts!

Megan and I have both wanted to have a punching bag available to beat on for a long time (I remember having a conversation about it in the condo in Goleta, so we’ve been discussing it for at least 2.5 years). Well, she finally got tired of waiting on me and bought a big 80 pound bag. Funnily enough, however, just having a bag is just the start – we didn’t really enjoy using it while it was lying on the ground or propped against a wall!

And so began the project.  

I did some research, shopped around, and eventually decided that I wanted to mount it on the wall using this wall mount. Some additional reading convinced me that I also needed a heavy bag spring and a bag chain and swivel. A couple days later I received my items and was ready to go.

When everything showed up, I was pretty excited to get started on the project. So I immediately ran to the local hardware store, picked up a couple 2x4s and some bolts and washers. I cut the 2x4s to 52” so they would span across four studs (at 16” apart each) and mounted them parallel to one another for the wall mount to be mounted on. Unfortunately, I either pre-drilled the holes to large, or was plain unlucky, because three of the bolts refused to stay put properly, and when the bag was mounted, the weight of it's swinging was pulling the 2x4s away from the wall. Ugh.

I needed to try again. Back to square one.

The second time, I got more serious. I decided that I didn’t want the sheetrock between the studs and my lumber, and I wanted bolts made specifically for this kind of attaching. Also, I wanted 2x6s instead of 2x4s so I could fasten the lumber with pairs of bolts instead of single bolts.

Cutting into the drywall was a new thing for me, but it was fairly simple once I had a decent drywall saw (which I learned I needed only after I broke one of the blades for my sawsall). At this point, I realized that pictures would be nice!

(Pro tip: when removing drywall, you can find the screws/nails (mine had both!) that are fastening the drywall in place using a magnet! For people that do this all the time, that's probably obvious, but I was having a hard time finding them before I thought of that.)

There's a hole in the wall!
Up close and personal with the hole in my wall.
After the hole was done, it was time to add the lumber. The bottom one was pretty easy -- I had a 1/2" of drywall to rest the board on. The top one was a bit trickier -- I had to get creative and cut a bit of one of the old 2x4s to serve as a brace.
2x6s mounted with a small brace wedging the top board in place while I screw in the bolts to hold it.

Finally, I was ready to re-mount the wall mount for the bag. This was also pretty tricky, as the mount itself weighs 15-20 pounds and its really awkward to hold and I was working by myself. So I got clever again -- I laid the mount down on a piece of cardboard and traced it, marking where the holes for the bolts were. Then I used this template to put some small drywall screws in place that the mount could hang on temporarily. At that point it was a simple matter of removing one screw at a time and drilling the real bolt into place for the mount.
The bag hanging on its own. Finally!

And here's the bag in it's "resting position", folded away to the side.

I managed to save the majority of the drywall I needed to remove, so I'll use that to replace the middle section. I also plan on painting the boards to match the wall at some point. All that finish work is going to wait for a while though, so I can keep an eye on the mounting as we start using the bag, just in case.

Oh! I also finally decided that my tool management strategy was getting hopelessly behind the number of tools I have collected, so I got myself a new present: